SABER 1000W 15Ah
SABER 1000W 15Ah
SABER 1000W 15Ah
SABER 1000W 15Ah
SABER 1000W 15Ah
SABER 1000W 15Ah

SABER 1000W 15Ah

SABER-CG-15

Color
Regular price $1,199.00 Sale price $1,599.00
/
Explore new roads with Senada Bikes®!

MODEL SIZE

1860*700*1120mm

MOTOR

Rear Hub 48V 1000W Brushless, Toothed

BATTERY

Removable Lithium-ion 48V 15AH Dorado Battery

CHARGING TIME 

7-9 Hours

DISPLAY 

Handle LCD Meter

SENSOR 

Speed Sensor   

BATTERY LIFE

600-700 Cycles

REAR BRAKE 

Mechanical Disc Brake

FUNCTIONS

Pedal Assist / On-Demand Twist Throttle

FRAME 

Aluminum Alloy MTB Frame

RIMS 

Aluminum Alloy Spoke Rims

TIRES

Chaoyang 26"×4.0" Fat Tires

FENDERS 

Included Front/Rear (Free Gift)

WEIGHT WITH BATTERY

72 lb

WEIGHT CAPACITY

330 lb 

DERAILLEUR

SHIMANO 7 Speed

FRONT BRAKE 

Mechanical Disc Brake

RECOMMENDED RIDER

5'7" To 6'6"

 

 

 

*Senada Bikes Set Speed Limit According To United States Federal Regulations, Maximum Speed In Power Mode Is Programmable And Can Be Adapted To The Local Regulations Of Any Country.

 

*All Range Estimates Are Contingent Upon Rider And Towing Weight, Wind Speed, And Terrain.

 


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

FAQS

SABER comes about 95% assembled, there are some final assembly and adjustments needed, like the front wheel, the handlebar, the seat, the pedals, the headlight and the front fender.

 

About the front fender and the headlight--

 

The screws and nuts are attached on the front fork, you can remove them, put the fender on and screw them back. Two sets are on both sides of the fork, one set on top is for both the fender and the headlight. Here is a guide video about how to install them: 

https://www.youtube.com/watch?v=jNii5YfIxEc

 

For any assembly questions, you can download the instructions on our website https://senadabikes.com/pages/tools or contact our support team via contact@senadabikes.com

The red button below the throttle is to enable/disable the throttle function.When the throttle function is off, code E08 will show on the display, and only PAS mode is functioning; when the throttle function is on, both throttle and PAS are working.https://www.youtube.com/watch?v=wT_9conxWdI

The front wheel hardware are pre-installed on the front hub, a video about how to install the front wheel on SABER/HERALD.

 

https://www.youtube.com/watch?v=dMr5JbSfFgA

1. Look for the “L” or “R” sign on the axle or wrench flat.

 

2. The left pedal needs to tighten counterclockwise, the right pedal is tightened clockwise.

 

3. The thread of the pedal and crank arm needs to be aligned carefully, if the thread is misaligned, the crank will be mangled or cross-threaded.

 

4. It is suggested to tighten the pedals with a pedal wrench, and use some anti-seize compound.

(1) Long press UP and DOWN button to enter the settings mode;     (2) short press M to P02 - Unit of mileage;     (3) short press UP and DOWN to change parameters between 0 and 1, 1 is mile;    (4) long press M to save the valve;     (5) long press UP and DOWN to exit. Here is a guide video of How to change the mileage unit on SABER:https://www.youtube.com/watch?v=wYoiU3cEIb8

Long press "∧" button near the left handlebar.

SABER/HERALD just has one set of key, it is used to lock/unlock the battery:

https://www.youtube.com/watch?v=zh4ifVKux_M

 

The key set has two same keys, we suggest you keep one on each at home just in case.

Please visit FAQ section to get more answers or solutions, or, you can ask Senada support team directly at contact@senadabikes.com.