A leaking bike tire can easily ruin a good trip. Due to the higher weight and faster movement of electric bikes, even not considering various of road environmental factors, e-bike tire blowouts do occur.
The good news is that, you can take a little precaution to reduce the likelihood of an e-bike blowout. Let's talk about it today!
How does a flat tire happen?
1. Road condition
Hard rubbish such as nails and glass on the side of the road; sharp objects such as rocks, branches, and castor seeds in the woods can cause flat tires.
2. Inflating condition
Over-inflation can cause tires to rupture during riding due to excessive internal pressure, while under-inflation can easily cause sharp objects on the road to puncture the inner tube.
In addition, people often neglect to check the valve, which is also a common cause of tire leaks.
3. Tire condition
After a long ride, there may be small tears and cracks on the tire surface, some small objects can stuck in the tire tread, which are all potential factors for a subsequent tire blowout.
Five great ways to prevent flat tires
Avoiding electric fat bike 1000w leaks is a good preventive measure compared to repairing leaking tires. In addition, taking care of your e-bike tires can prolong their usage lives.
1. Maintain the best air pressure
Maintaining proper tire pressure is one of the basic measures to avoid flat tires. We recommend that you use a pressure gauge to observe the tire pressure, make sure not to over-inflate or under-inflate.
The tires will be marked with a range of recommended pressures, the rider can adjust them within the recommended range to suit their riding comfort.
The correct tire pressure for winter 1000 watt electric bike is 10-20% lower than that used in summer. Lower pressures give the rubber better grip and reduce slippage.
2. Check the tire surface regularly
Check the tire tread before each ride and clean up any foreign bodies that may be trapped in the tread; if the tire tread is thin and torn, you may need to replace it.
Please note that low tread will also affect your riding efficiency - your 1000w fat tire ebike will need more power, it will consume more electricity, which will shorten your range and affect your travel plans.
3. Use puncture-proof tire products
To prevent the unfortunate contingency of a punctured tire, riders can prepare some anti-leak and pumping products in advance.
If it is a small cut or puncture, the rider can seal it with special glue and the sealant will immediately seal the hole, creating a solid plug.
If it is a flat cut, fill it with sealant and re-inflate. The sealant spreads automatically in the tube and covers the entire surface. When tires are pre-filled with sealant they provide excellent protection against air leaks.
4. Using tire liners
Tire liners are thin strips of plastic inserted between the tire and the inner tube. Tire liners reduce the likelihood of tires being punctured by thorns, glass or other sharp objects. If you live in an area with a lot of thorns or road debris, liners are perfect for you.
However, liners add weight to the tire and may increase the tire's rolling resistance. There is a difference between thin and thick tire liners. If you care about the riding experience, choose a thin tire liner; if it's more important to protect your tires on special surfaces, a heavy duty tire liner is better for your e-bike.
5. Avoid riding on the side of the road
The sides of roads are often full of sharp objects that can easily damage your tires, so it's the best to ride on regular riding tracks or road surfaces rather than on the side of the road.
It helps to know the cause in advance and to take appropriate action, but the rider should know that a flat tire is still inevitable. If you do get a flat tire while riding, try slowing down and moving it to the side of the road, getting emergency attention to the tire in a safe environment, and find a specialist bike repair shop to do a full check of your bike as soon as possible.